8 tips for painting your parquet

8 tips for painting your parquet

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Tip # 1: concretely draw your project upstream

Too dark, too light, too damaged… it's decided, your parquet floor really needs a fresh cut! By choosing to paint it, you avoid a significant construction site, and it is also good news for your wallet. It is still essential to think of the project in its entirety before launching: material, duration of works, budget ... and of course the painting! If the specific ranges are accessible to all, the choice of color also plays a decisive role in the success of this renovation.

Tip # 2: choose the paint according to your needs and desires

Choosing a paint suitable for your floor is the sine qua non of a parquet that resists shocks and time. You then have three possibilities: - specific paints for floors, very resistant - special acrylic paints parquet, which must be protected by a varnish once dry - stains, ideal for a pretty transparency On the color side, choose colors clear if you want the room to breathe or appear larger. On the contrary, bet on warm colors to create a cozy and enveloping atmosphere. For more fantasy, you can also try the patchwork of colors or even the graphic patterns drawn with layers. Clean or with a touch of madness, it's up to you!

Tip # 3: Equip yourself!

Before you start, make sure you have the materials you need for the different stages of the project: a special electric sander with parquet and abrasive cloth, a vacuum cleaner, a cloth, masking tape, a paint brush, a roller long hairs, a preparation for parquet, paint, and finally a varnish varnish if you have chosen on acrylic paint.

Tip # 4: clean the floor

To paint a vitrified, laminate or pre-varnished parquet, it is essential to clean it. First by vacuuming, then using a soda-based cleaner which is rinsed until total disappearance of any traces of product. Skipping this step may result in non-adherence of the preparation for parquet paint. It would be a shame, right? Waxed parquet floors require cleaning with a dewaxing shampoo. Finally, rough floors do not need to be washed.

Tip n ° 5: sand the parquet

Now is the time to sand the parquet to improve the adhesion of the paint preparation. As with cleaning, not all types of wood require the same treatment. Sand the rough, vitrified or pre-varnished floors with 120 grit sandpaper and with 240 the laminate floors. You can use a sanding block as well as an electric sander to carry out this step. Then remember to dust the entire surface to be painted with a simple damp cloth.

Tip n ° 6: prepare your rough parquet

Before you start, don't forget to protect your baseboards with a thick and resistant masking tape. It is done ? Then, it is time to move on to the application of the preparation for rough parquet. The latter aims to prevent the formation of stains on tannic woods such as oak or chestnut. As with the installation of a classic paint, start by clearing the corners with a brush, then continue with a long-haired roller, of course following the blades and the grain of the wood. Let dry two good hours. The trick to take this step without any problems: work in small areas.

Tip # 7: apply the right paint

The parquet is ready, it's time to attack the paint! To avoid getting stuck, obviously start at the back of the room up to the door. First step: clear the angles with a brush as you apply the paint with a roller. Paint the surface in regular, crossed passes, following the grain of the wood. Watch out for excess thicknesses and the accumulation of paint in the chamfers! Then follow the drying instructions indicated on the paint bucket you have chosen before proceeding to the second coat. For better adhesion of the latter, you can sand the parquet again using a fine-grained abrasive cloth. For the next 15 days, avoid over-stressing your parquet (shocks, heels or chair legs, cleaning, etc.).

Tip # 8: Apply a sealer varnish

This step is necessary if, and only if, you have used acrylic paint. The role of glazing varnish is to protect your parquet as well as possible and to make your life easier during maintenance. To apply it, use a large brush, and follow the direction of the wood. Let dry then repeat the operation. Wait at least 48 hours before putting all your furniture back in place.


  1. Jacinto

    Thank you for the help in this matter. At you the remarkable forum.

  2. Tojazil

    Bravo, the magnificent phrase and it is timely

  3. Tagal

    In my opinion, they are wrong. I am able to prove it. Write to me in PM, speak.

  4. Brangore

    And I liked it…

  5. Shadoe

    You have appeared are right. I thank for council how I can thank you?

Write a message